Back

Static compliance (Cstat) vs. dynamic compliance (Cdyn)

Article

Author: Clinical Experts Group, Hamilton Medical

Date of first publication: 02.03.2018

Why do Hamilton Medical ventilators monitor static compliance (Cstat) instead of dynamic compliance (Cdyn)?
Static compliance (Cstat) vs. dynamic compliance (Cdyn)

What is static compliance?

Static compliance represents pulmonary compliance during periods without gas flow, such as during an inspiratory pause. In Hamilton Medical ventilators it is obtained by the least square fit method described by Iotti (Iotti, G., & Braschi, A. (1999). Measurements of respiratory mechanics during mechanical ventilation. Rhäzüns, Switzerland: Hamilton Medical Scientific Library.1​). An inspiratory pause or an inspiratory hold maneuver is not needed.

Calculating static compliance (Cstat):
Cstat = VT / (Pplat - PEEP)   

Calculating dynamic compliance (Cdyn):
Cdyn = VT / (PIP - PEEP) 

 

Diagram showing a pressure-volume loop
Pressure-volume loop
Diagram showing a pressure-volume loop
Pressure-volume loop

Cstat vs. Cdyn

Depending on the measurement technique, Cdyn is prone to underestimating the total compliance of the lung and thorax as it is influenced by the resistive part of lung mechanics.

Continuous, reliable measurement of static compliance of the lung and thorax is of the utmost importance in state-of-the-art mechanical ventilation. Dynamic compliance cannot be considered a satisfactory substitute, as it is dependent on the airway resistance and can be misleading in various clinical conditions.

However, Cdyn is used in Hamilton Medical's ASV® mode to estimate the maximum tidal volume allowed, which is calculated as:
Cdyn x Pmax (Pmax = set alarm limit (Phigh)-10-PEEP).

Measurements of respiratory mechanics during mechanical ventilation

Iotti, G., & Braschi, A. (1999). Measurements of respiratory mechanics during mechanical ventilation. Rhäzüns, Switzerland: Hamilton Medical Scientific Library.