Setting PEEP using transpulmonary pressure measurement

11.09.2017
Author: Hamilton Medical, Reviewer: NA

One of the greatest challenges when mechanically ventilating patients is finding the correct setting for positive end-expiratory pressure (PEEP). This task can be made easier by using transpulmonary pressure measurement to distinguish between the pressure in the lungs and the chest wall components.

The ability to partition between the lung and chest wall components helps you to set the optimal PEEP, define a safe range for driving and plateau pressures, and to titrate and optimize lung recruitment maneuvers. But how can you distinguish between them when the pressures measured at the airway opening cannot be used to accurately assess the stress and strain applied to the lungs? A simple way of partitioning them is  by using esophageal pressure measurement. The airway pressure minus the esophageal pressure measured during an end-inspiratory or an end-expiratory occlusion gives you the transpulmonary pressure, which represents the true distending pressure of the lungs.



Transpulmonary pressure measurement is standard on the HAMILTON-G5 and HAMILTON-S1* ventilators, which are equipped with an auxiliary port for the connection of an esophageal catheter. This is inserted through a nostril to the stomach and then withdrawn into the esophagus, with the balloon being positioned in the lower third of the esophagus. On the ventilator display, simply change to the four-waveform setting and the lower two waveforms will then show you the esophageal and transpulmonary pressure. You can freeze the screen to read the values.

In patients with acute respiratory distress syndrome (ARDS), you can set PEEP in order to achieve a transpulmonary pressure of 0 to 5 cmH2O at end expiration, with the aim of preventing atelectrauma caused by repeated opening and closing of the distal airways and alveoli. Transpulmonary pressure measurement can also be used to set the tidal volume, and inspiratory pressure for ARDS patients, and together with the P/V Tool® to assess lung recruitability and perform recruitment maneuvers. 

This video shows you how to set PEEP using transpulmonary pressure measurement on a HAMILTON-G5 ventilator.

Learn more about:

HAMILTON-G5

HAMILTON-S1

P/V Tool

* Not available in the USA

Downloads

Product Category Type/Size Date / PN Language
10 Expert Tips: Esophageal Pressure Measurement in ARDS Patients
PDF
4 MB
2017-09-25

ELO20150701N.10

EN

Transpulmonary pressure measurement
PDF
15.9 MB
2018-11-21

ELO20150614S.02

EN

Transpulmonary pressure measurement bibliography
PDF
1.1 MB
2018-03-26

ELO20160112S.04

EN

Related Articles

TPM, transpulmonary pressure, measurement, esophageal catheter, PEEP, setting PEEP
Back

Date of Printing: 10.12.2018
Disclaimer:
The content of this Knowledge Base is intended for informational purposes only. Hamilton Medical AG provides no warranty with respect to the information contained in this Knowledge Base and reliance on any part of this information is solely at your own risk. For detailed instructions on operating your Hamilton Medical device, please refer to the official Hamilton Medical Operator’s Manual for the respective device.