Neonatal ventilation with the HAMILTON-C1/T1/MR1
This video demonstrates how to use the neonatal function on the HAMILTON-C1/T1/MR1 ventilators.
The neonatal function works the same way on all three devices and enables you to provide optimal care for even the tiniest patients, regardless of the location. Using the example of the HAMILTON-C1, we take you through the steps required to set up the ventilator, including insertion of the neonatal expiratory valve and connection of the neonatal flow sensor. We then show you how set control parameters and alarms, carry out the preop checks and start ventilation, as well as how to switch to nCPAP modes.
The content of this Knowledge Base is intended for use by Hamilton Medical distribution partners for informational purposes only, and should not be copied, distributed or published in any way. While the information contained herein is believed to be accurate, it does not represent an official recommendation from Hamilton Medical AG, nor may it substitute an opinion, assessment or instructions provided by a trained healthcare professional.