Best-practice breathing circuit configuration for transport with HAMILTON-C1/T1/MR1

05.03.2018
Author: Clinical Experts Group, Hamilton Medical, Reviewer: N/A

During transport, I am ventilating patients from premature infants through to pediatrics. Which breathing circuit, flow sensor or CO2 airway adapter should I use for each patient?

The following chart represents a best-practice approach for deciding which combination of breathing circuit, flow sensor, airway adapter and expiratory valve to use for each patient. This chart can be downloaded below and printed out for use as a basic beside handout.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Relevant devices: HAMILTON-C1/T1/MR1 (SW v2.2.0)

Downloads

Product Category Type/Size Date / PN Language
95_2017_04_Breathing-circuit-specifications_table_v1.pdf
PDF
64.1 KB
2018-03-02

Breathing circuit, flow sensor, expiratory valve, airway adapter, transport, neonatal, premature, infants, pediatrics, HAMILTON-C1, C1, HAMILTON-T1, T1, HAMILTON-MR1, MR1
Back

Date of Printing: 10.12.2018
Disclaimer:
The content of this Knowledge Base is intended for use by Hamilton Medical distribution partners for informational purposes only, and should not be copied, distributed or published in any way. While the information contained herein is believed to be accurate, it does not represent an official recommendation from Hamilton Medical AG, nor may it substitute an opinion, assessment or instructions provided by a trained healthcare professional.