Session expired

Due to inactivity your session has expired. Please login again.

Go to homepage


Switch to United States
HAMILTON_EM7_White_Learning-Hub Hamilton Logo

Do you want to switch to ICU?

Switch
 Prepare

Get your device ready.

Set it up for the call

1. Know your vent 2. Set it up 3. Keep it ready 4. Set up a CO2 sensor
HAM-EM7_Set-it-up
E-Module

2.  Set up your ventilator for the call

Walk through everything between pulling your HAMILTON-EM7 off the shelf and connecting it to your patient: power, oxygen, circuit assembly, and the preoperational check that confirms you’re good to go.
10 min
EN Start module
HAM-EM7_Tile_Know-vent
Learning nugget

1.  Know your vent

15 min
EN Explore
HAM-EM7_Keep-it-ready
E-Module

3.  Keep it ready

15 min
EN Explore
HAM-EM7_CO2-Calibration-Progress
Learning nugget

4.  Set up a CO2 sensor

10 min
EN Explore

Learning objectives. What will you be ready for?

This module prepares you to:

  • Start up the HAMILTON-EM7, and confirm DC connection and full battery charge

  • Connect the oxygen hose and install the breathing circuit correctly

  • Run the preoperational check and confirm a successful result

  • Set the display brightness for Day and Night mode to suit your environment