We have detected that you are visiting our website from United States.
We offer a separate version of the website for your country (United States).

Switch to United States

HAMILTON-T1 Military. Transport ventilation for armed forces

HAMILTON-T1 Military; in the background a military helicopter is shown HAMILTON-T1 Military; in the background a military helicopter is shown

The call of duty. A reliable companion in the field

The HAMILTON-T1 Military is our ventilator created especially for armed forces. It is the first device to combine the functionality of a fully featured ICU ventilator with the compactness and ruggedness required for tough conditions. This allows you to offer your patients high-end ventilation support during transport, even in the most challenging environments.

HAMILTON-T1 Military rescue chain

Lightweight, compact, and sturdy

The compact, lightweight design of the HAMILTON-T1 Military helps make handling the ventilator easier.


The water-resistant housing offers impact protection and incorporates a shock-resistant, anti-reflective display, making this ventilator a rugged and reliable companion.

Military in a winter mission

For use in the toughest conditions

The HAMILTON-T1 Military was designed to withstand demanding environmental conditions, and meets the military standards MIL-STD-810G and MIL-STD-461F. It can operate in temperatures ranging from -15°C up to +50°C, tolerate humidity levels from 5% to 95%, be used at altitudes of up to 25,000 ft, and withstand splashing water or pouring rain (IP54 ingress protection).

Military aircraft

Approved for all types of transport

The HAMILTON-T1 meets the transport standards EN 794-3 and ISO 10651-3 for emergency and transport ventilators, EN 1789 for ambulances, EN 13718-1 and RTCA/DO-160G for aircraft, as well as IEC60601-1-12 for basic safety and essential performance. It reliably accompanies your patients to any destination either within or outside of the hospital, by air, land, or sea


According to protocol. Predefine your startup settings

You can define ventilation modes and settings that comply with military operating procedures and clinical practice guidelines for three different patient scenarios.


Even in the dark. Compatible with night vision goggles

Thanks to the night vision option, you can use the HAMILTON-T1 Military with night vision devices without significantly affecting the pilot’s visibility.

HAMILTON-T1 Military CPR feature

Code blue! Support during CPR

CPR ventilation adapts ventilation settings to situations where you perform CPR. It shows the main monitoring parameters and curves relevant to the situation, and supports your workflow with quick access to preconfigurable settings, adequate alarm and trigger adjustment, and a CPR-timer display (Not available in all countriesA​​).

Soldier NBC Filter

For toxic environments. The NBC filter adapter

You can order the HAMILTON-T1 Military with an optional NBC filter adapter to attach a standard NBC filter canister. The adapter has a NATO standard thread, compliant with EN 148-1 standards.

HAMILTON-T1 Military in combination with Hamilton connect module

Stay connected! Communication and connectivity options

The HAMILTON-T1 Military offers different communication boards allowing connection to CO2 and SpO2 sensors, serial RS-232 interfaces for hospital monitors or patient data management systems, the HAMILTON-H900 humidifier (The HAMILTON-H900 is not approved for use during transport.B​), or the nurse call function.

In addition, the Hamilton Connect Module provides wireless and wired connectivity protected by state-of-the-art security. It also enables connection with the Hamilton Connect App (The Hamilton Connect App is not intended to replace the real-time display of data on the ventilator. DO NOT USE the app to supplement or replace any part of the hospital's device monitoring. C​).

HAMILTON-T1 Military

Wear your colors. Fitting for military use

The HAMILTON-T1 Military is outfitted in military gray and black for a more discreet look than the bright red civilian version.

  • Standard
  • Option
  • Not available
Patient groups Adult/Ped, Neonatal
Dimensions (W x D x H) 320 x 220 x 270 mm (ventilation unit)
630 x 630 x 1380 mm (without handle)
630 x 630 x 1433 mm (with handle)
Weight 6.5 kg (14.3 lb)
18.5 kg (40.8 lb) with trolley
Monitor size and resolution 8.4 in (214 mm) diagonal
640 x 480 pixels
Detachable monitor
Battery operating time 4 h with one battery
8 h with two batteries
Hot-swappable battery
Air supply Integrated turbine
O2 connector DISS (CGA 1240) or NIST
Connectivity CO2/Nurse Call/COM1, CO2/SpO2/COM1, CO2/SpO2/Humidifier & COM1, USB port, RJ-45 Ethernet port
Loudness 43 dB in normal operation
Volume controlled, flow controlled
Volume targeted, adaptive pressure controlled
Intelligent ventilation ASV®, INTELLiVENT®-ASV® (option)
Noninvasive ventilation
High flow
Visualization of lung mechanics (Dynamic Lung)
Visualization of the patient’s ventilator dependence
Esophageal pressure measurement
SpO2 monitoring
Recruitability assessment and lung recruitment (P/V Tool Pro)
Patient-ventilator synchronization (IntelliSync+)
CPR ventilation
Hamilton Connect Module
Hamilton Connect App
Remote connection to HAMILTON-H900 humidifier
Integrated IntelliCuff cuff pressure controller
Integrated pneumatic nebulizer
Integrated Aerogen nebulizer
Compatibility with Sedaconda ACD-S anesthetic delivery system
Field beds in a tent Field beds in a tent

For your convenience

HAMILTON-T1 Militär fort bliss combat support hospital HAMILTON-T1 Militär fort bliss combat support hospital




  • A. Not available in all countries
  • B. The HAMILTON-H900 is not approved for use during transport


  • C. The Hamilton Connect App is not intended to replace the real-time display of data on the ventilator. DO NOT USE the app to supplement or replace any part of the hospital's device monitoring