Footnotes
- A. Não disponível em todos os países
- B. O HAMILTON-H900 não está aprovado para uso durante o transporte
The HAMILTON-T1 is the first device to combine the functionality of a fully featured ICU ventilator with the compactness and ruggedness required for tough conditions. This allows you to offer your patients high-end ventilation support during transport, even in the most challenging environments.
The compact, lightweight design of the HAMILTON-T1 helps make handling the ventilator easier.
The water-resistant housing offers impact protection and incorporates a shock-resistant, anti-reflective display, making this ventilator a rugged and reliable companion.
The HAMILTON-T1 was designed to withstand demanding environmental conditions, and meets the standards MIL-STD-810G and MIL-STD-461F. It can operate in temperatures ranging from -15°C up to +50°C, tolerate humidity levels from 5% to 95%, be used at altitudes of up to 25,000 ft, and withstand splashing water or pouring rain (IP54 ingress protection).
The HAMILTON‑T1 meets the transport standards EN 794‑3 and ISO 10651‑3 for emergency and transport ventilators, EN 1789 for ambulances, EN 13718‑1 and RTCA/DO‑160G for aircraft, as well as IEC60601‑1‑12 for basic safety and essential performance. It reliably accompanies your patients to any destination either within or outside of the hospital, by air, land, or sea
Thanks to the night vision option, you can use the HAMILTON-T1 in combination with night vision devices without significantly affecting the pilot’s visibility.
CPR ventilation adapts ventilation settings to situations where you perform CPR. It shows the main monitoring parameters and curves relevant to the situation, and supports your workflow with quick access to preconfigurable settings, adequate alarm and trigger adjustment, and a CPR-timer display (
The HAMILTON‑T1 offers different communication boards allowing connection to CO2 and SpO2 sensors, serial RS‑232 interfaces for ePCR, the HAMILTON‑H900 humidifier (
In addition, the Hamilton Connect Module provides wireless and wired connectivity protected by state‑of‑the‑art security.
If you want to go off the grid completely, you can switch the wireless connectivity off.
The HAMILTON-T1 for armed forces is outfitted in gray and black for a more discreet look than the bright red civilian version.
| Grupos de pacientes | Adult/Ped/Neo |
|---|---|
| Dimensões (L x P x A) | 320 x 220 x 270 mm (ventilation unit) 630 x 630 x 1380 mm (without handle) 630 x 630 x 1433 mm (with handle) |
| Peso | 6.5 kg (14.3 lb) 18.5 kg (40.8 lb) with trolley |
| Tamanho e resolução do monitor | 8.4 in (214 mm) diagonal 640 x 480 pixels |
| Monitor amovível | |
| Tempo de operação da bateria | 4 h with one battery 8 h with two batteries |
| Bateria intercambiável a quente | |
| Fonte de ar | Integrated turbine |
| Conector O2 | DISS (CGA 1240) or NIST |
| Conectividade | CO2/Nurse Call/COM1, CO2/SpO2/COM1, CO2/SpO2/Humidifier & COM1, USB port, RJ-45 Ethernet port |
| Sonoridade | 43 dB in normal operation |
| Volume controlado, fluxo controlado | |
|---|---|
| Volume alvo, pressão adaptativa controlada | |
| Pressure-controlled | |
| Ventilação inteligente | option |
| Ventilação não invasiva | |
| Alto fluxo | |
| Visualização da mecânica de pulmão (Pulmão Dinâmico) | |
|---|---|
| Visualização da dependência do paciente em relação ao respirador | |
| Capnografia | |
| Monitorização de SpO2 | |
| Lung stress and strain monitoring (Lung Impact panel) | |
| Medição da pressão esofágica |
| Avaliação da recrutabilidade e recrutamento pulmonar (P/V Tool Pro) | |
|---|---|
| Sincronização do paciente com o respirador (IntelliSync+) | |
| Ventilação de RCP | |
| RSI Workflow/mode | |
| Módulo Hamilton Connect | |
| SpeakValve compatibility | |
| On-screen help | |
| O2 assist |
| Conexão remota ao umidificador HAMILTON-H900 | |
|---|---|
| Controlador de pressão do cuff integrado IntelliCuff | |
| Nebulizador pneumático integrado | |
| Nebulizador Aerogen integrado | |
| Compatibilidade com o sistema de administração de anestésico Sedaconda ACD-S |
The standardized transport and storage case for the HAMILTON-T1 is light in weight, yet robust and watertight enough to protect the ventilator even in harsh environments.
Storing your HAMILTON-T1s in this pelicase allows it to be always ready to be shipped wherever the mission goes.
The HAMILTON-T1 has been recognized by NATO countries as a standardized material item of supply (NATO Stock Number: 6515-33-211-4889).
In the United States, the HAMILTON-T1 can also be ordered through the ECAT catalog.
E-learning is an ideal solution for training a large number of users in the field, regardless of the time and place. Hamilton Medical’s free e-learning platform offers modules specific to the HAMILTON-T1 with the option of getting certified. All you need is internet access and a computer or tablet PC.
The HAMILTON-T1 is field-upgradable so you have access to the latest ventilation technology and product enhancements even in remote locations. In safety-critical areas, your technical staff can be trained to complete maintenance and repairs themselves.
